• Call Us 01225 571161 or 07903 836203

XPEL Paint Protection Film

XPEL Paint Protection Film

XPEL Paint Protection Film

XPEL Ultimate Self Healing Protective Film

Factory trained and authorised installer of XPEL Paint Protection Film

XPEL’s Ultimate Paint Protection Film combines best-in-class durability and clarity not previously available in the market. With its very low surface energy, XPEL Paint Protection Film sheds contaminants that would otherwise stain or yellow conventional films. In addition, the clear coat employs special elastomeric polymers that “heal” over time eliminating swirl marks and other fine scratches without having to do anything.

XPEL Ultimate PPF carries a warranty against, yellowing, cracking, peeling, staining, and hazing, covering both film and labor. XPEL Ultimate is truly the most revolutionary Paint Protection Film ever invented!

XPEL Stealth Paint Protection Film

XPEL Stealth Paint Protection Film finally brings true protection to matte paint. Made from a satin finish version of the same proven clear polyurethane as their Ultimate film, XPEL Stealth is guaranteed to perform as great as it looks.

XPEL Stealth Protection Film employs the excellent conformability of their other films, making it much easier to install than vinyl, yet it can easily withstand rock and debris impacts that would normally destroy the paint underneath.

XPEL Stealth is also perfect for protection over painted matte finishes and matte vinyl stripes. The matte finish blends in seamlessly, allowing protection to these surfaces without adding gloss.

Whether you want to alter your car’s glossy appearance, or protect your car’s already matte finish, XPEL has you covered.


Frequently Asked Questions regarding XPEL Paint Protection Film

[toggle title=”How does XPEL Ultimate Paint Protection Film heal itself?”]XPEL Ultimate Paint Protection Film uses a special polymer in its clear coat that flows even though it is cured. This allows the clear coat to find its natural level again after being disturbed on the surface. [/toggle]

[toggle title=”How deep a scratch will heal?”] The clear coat is designed to heal surface scratches and common swirl marks that occur during routine washing of the car. If the scratch penetrates through the film’s clear coat, it will not heal. [/toggle]

[toggle title=”How long does it take for a scratch to heal?”] The time for a scratch to heal depends on the severity of the scratch and the ambient temperature. Minor scratches usually heal in one hour at room temperature (22°C). In warmer climates, healing time will be shorter. The healing process can be accelerated at any time by pouring hot water over the scratched area. [/toggle]

[toggle title=”How many times will the clear coat heal itself?”] With this technology, there is no limit to the number of times the clear coat can heal itself. As long as the clear coat is not penetrated it will heal over and over again. [/toggle]

[toggle title=”How long will the clear coat last?”] Depending on how the film is cared for, the clear coat can last indefinitely. Regular washing and waxing will keep the clear coat in top condition for years to come. [/toggle]

[toggle title=”How does XPEL Paint Protection Film resist staining?”] The clear coat on XPEL Ultimate has a very low surface energy, which makes it extremely difficult for organic compounds to stick to the film. Insects, bird droppings and environmental contaminants (which would normally cause yellowing) such as road oils, exhaust smoke and pollution can be removed during regular washing. An example of a similar technology would be Teflon, where a Teflon pan is easy to clean because nothing will stick to it.[/toggle]

[toggle title=”What if a stain does not come off the film during normal washing?”]If ordinary car wash or soap and water will not remove a stain, there are a variety products available to do the job. In most cases simple isopropyl rubbing alcohol will remove anything on the surface of the film. In cases of more severe staining, or where something has been left on the film for a long period of time, a sparing amount of lacquer thinner can be used. Bug and tar remover is also effective. If you are unsure about the use of any other chemical on the surface of the film, please contact us on 07443 857020 for assistance.[/toggle]


Your Name *

Your Email *

Contact Number

Your message

Keep In Touch

Get service announcements and the latest news by email. We’ll always treat your details with the utmost care. You can, of course, opt out of these communications at any time! See our Privacy Policy for more info.

    We use cookies to ensure you get the best experience on our website.
    Learn More
    Don`t copy text!